Digital 3-Point Internal Micrometer Set

0,5-1", Complete Unit, IP65, TIN

Item number: 468-987

468-987.jpg
468-987.jpg
468-168_a.eps
04azb157_a1_m.pdf
p120.pdf
156-101_a1.eps
tuev_en_0000021605.eps
certific_gb.jpg
ip65.eps

Digital 3-Point Internal Micrometer Set

0,5-1", Complete Unit, IP65, TIN

Item number: 468-987

List Price
£3,744.00 inc. VAT
£3,120.00 ex. VAT
  • Data sheet
  • Recommend page
  • Add to comparison
Recommend page
Description
These are three-point internal micrometers that offer you the
following benefits:
  • Complete unit set.
  • Titanium-coated measuring pins give you excellent durability and impact resistance.
  • They also have excellent resistance against water and dust (IP65 protection level), allowing you to use this product in machining situations that include splashing coolant fluid.
  • Large LCD display with character height of 7.5 mm enables you to read measurements easily.
  • With setting rings but without extensions.
These are three-point internal micrometers that offer you the
following benefits:
  • Complete unit set.
  • Titanium-coated measuring pins give you excellent durability and impact resistance.
  • They also have excellent resistance against water and dust (IP65 protection level), allowing you to use this product in machining situations that include splashing coolant fluid.
  • Large LCD display with character height of 7.5 mm enables you to read measurements easily.
  • With setting rings but without extensions.
Range:
0.5 - 1 Inch
Individual ranges:
0.5-0.65", 0.65-0.8", 0.8-1"
Models included:
468-264 / 468-265 / 468-266
Setting rings included:
ø0.65" (177-182)
ø0.8" (177-287)
Mass:
1290 g
Digital step:
0,001 mm, 0,001 mm/0,00005" (models up to 4")
/ 0,001 mm/0,0001" (models over 5")
Measuring pins:
Titanium coated tungsten carbide
(6-12 mm)
Titanium coated hardened steel
(12-100 mm)
Taper: tungsten carbide
Battery life:
approx. 1,2 years
Display:
LCD, character height 7.5 mm
Delivered:

Including box, key, 1 battery, setting ring,
certificate of inspection (inside micrometer only)

ZERO/ABS:
Yes
Auto Power OFF
after 20 min. non use:
Yes
2 x PRESET:
Yes
Low voltage alarm:
Yes
Function lock:
Yes
Data output:
Yes
HOLD:
Yes
Digital/Analog:
Digital
Accuracy:
0,5-0,8": ±0,0001"
0,8-1": 0,00015"
(excluding quantizing error)
- full contact of measuring surfaces must be established
Measuring surfaces:
Titanium coated tungsten carbide
(6-12 mm)
Titanium coated hardened steel
(12-100 mm)
Taper: tungsten carbide
Inch-Metric:
Inch/Metric